INSTRUCTIONS TO CANDIDATES
Candidates should have the following for this examination
- This paper has THREE exercises.
- Each exercise is allocated 30 minutes.
- All dimensions are in millimeters unless stated otherwise.
- The paper consists of 6 printed pages.
QUESTIONS
EXERCISE 1
The diagram in figure 1 below shows a wooden block. Using the drawing paper and instruments provide, draw in third angle the orthographic projection. (20 marks)
Figure 1
EXERCISE 2
Using the materials, tools and equipment provided, fabricate the stand as shown in the figure 2 below. (20 marks)
EXERCISE 3
Figure 3 below shows a lighting circuit. Using materials, tools and equipment provided, install the circuit such that the switch controls the lamp. (20 marks)
EXERCISE 4
Using materials, components and equipment provided, perform the following tasks.
- Correct the circuit shown in figure 1. (3 marks)
Let the examiner check your work.
Potentiometer
Figure 1 - Close switch S.
- Adjust the potentiometer for the ammeter to obtain current values in table 1 and in each case record the corresponding voltage values. (7 marks)
Current I(mA)
20
40
60
100
140
Voltage(V)
v(V-1)
I - Calculate the values of V/I and record them in the spaces provided in the table.
- Use the values in the table to draw a graph of voltage against current.
- Determine the slope of the graph. (2 marks)
- From the graph, determine the voltage, V when the current I = 160mA.
V = ................................................................................................ (1 mark) - State the purpose of the experiment. (1 mark)
MARKING SCHEME
EXCERCISE 1
Area to be marked |
Maximum score |
Awarded score |
Border line |
1 |
|
Title block |
2 |
|
Placements |
3 |
|
Correctly drawn detailed views |
6 |
|
Line work |
3 |
|
Neatness |
1 |
|
Clarity |
2 |
|
Dimensions |
2 |
|
TOTAL |
20 |
EXERCISE 2
Area to be marked |
Maximum score |
Awarded score |
Correct dimension |
6 |
|
Folds |
5 |
|
Debarring |
2 |
|
Correct hole position |
2 |
|
Drill |
2 |
|
Rivet |
2 |
|
General appearance |
1 |
|
Total |
20 |
Area to be marked |
Maximum score |
Awarded score |
ccu firm |
1 |
|
Dimensions |
3 |
|
Switch firm |
1 |
|
Holder firm |
1 |
|
Saddles well-spaced |
3 |
|
Horizontal run |
1 |
|
Vertical runs |
1 |
|
Perpendicular bends |
2 |
|
Color code |
3 |
|
Wire termination |
2 |
|
Switch connection |
2 |
|
Total |
20 |
|
EXERCISE 2
Using the materials, tools and equipment provided, fabricate the stand as shown in the figure 2 below. (20 marks)
EXERCISE 3
Figure 3 below shows a lighting circuit. Using materials, tools and equipment provided, install the circuit such that the switch controls the lamp. (20 marks)
Download Electricity Paper 2 Questions and Answers - Bunamfan Post Mock 2021 Exams.
Tap Here to Download for 50/-
Get on WhatsApp for 50/-
Why download?
- ✔ To read offline at any time.
- ✔ To Print at your convenience
- ✔ Share Easily with Friends / Students